Plate holder ACCESS DESIGN "ra" black Yamaha T-Max 530

Access Design is a must-have customization accessory. Whether to give a futuristic look, or to strengthen the Vintage look of your bike, there is no doubt that it will make your machine unique! Scented support for perfect alignment with the rear tireSingle-wheeled designReinforced mix to limit vibrationSet of the support covered with matt black epoxy paint for an aggressive lookLivated with approved LED plate lighting, connectors and mounting instructionsDeveloped and manufactured in France Technical specifications: 1 plate holder "Ras de wheel".1 reinforced steel mounting 5mm. 1 arm in thickness aluminium 5.mm1 shutter + 4 screws BHC M6x20.mm + 4 M6 nuts + 4 M6 washers and 4 screw heads and white washers. (The shutter is to be used for butchering the hole of the original plate holder).1 lighting L.E.D approved.12 thermoretractable connectors to be used (pince) for connection of lighting L.E.D and your flashers. The connection of the connectors is made on the main electric beam and behind the arm of the wheel-shaved plate holder. (Garden the original sockets of your flashers and plate lighting, cut the power lines 15 cm after the original connector).7 screws FHC M6x20.mm + 7 nuts M6 + 7 washers Ø 6.mm7 black nuts (to be used on the wheel raz and fastening of the arm swinging once the two pieces are assembled.)7 black head screws FHC (to be used on the wheel raz and fastening of the arm swinging once the two pieces are combined.)2 color cables different from 1 meter each for the connection of the lighting L.E.D.4 different colour cables of 1 meter each for the connection of the flashers.1 Braided sheath of 1.10 meter for the passage of the electrical cables, supplied with risers.(The indicators are not supplied)