Plate holder ACCESS DESIGN "ra" black Honda X-ADV

The plate holder “ra of wheel” brings the futuristic touch. It has been developed to keep the necessary functions of your vehicle. It is possible to put the flashers as well as a plate lighting L.E.D european standards. The fixation is made of 5mm thick steel, reinforced by folds, avoiding any vibration. The support is placed on the axis of the oscillating arm wheel and takes the place of your aluminum hold that serves as a tension for your chain. The arm part is made of 5mm thick aluminium. The feature of the wheel-shaved support is made of 3mm thick aluminium. It was scented to marry your tire, it avoids splashing the passenger and also the driver. The location allows to put the registration plate as well as the rod flashers and the lighting L.E.D approved or rear stop lamp. The shutter is positioned instead of the plate holder and resumes your original stop lamp. The electric beam is provided to connect your flashers, rear light and plate lighting. The entire wheel-resistant plate holder and shutter is coated with a matt black epoxy paint, resistant to weather and shocks pierres.Toutes french and international registration plates are suitable on the wheel-shaved plate holder. Contains: 1 plate holder "Ras de wheel"1 reinforced steel fixing thickness 5mm1 aluminum arm thickness 5mm1 shutter holding your original stop lamp and fixing kit1 lighting L.E.D approved12 retractable thermo connectors to be used for the connection of the lighting L.E.D, your flashers and stop light The connection of the connectors is made on the main electric beam and behind the arm of the wheel-shaved plate holder. (Get the original sockets of your flashers, plate lighting and stop light, cut the electrical wires 15cm after the original connector). 7 screws FHC M6x20mm + 7 nuts M6 + 7 washers Ø 6mm7 black nuts (to be used on the wheel razor and fastening of the arm oscillating once the two pieces are assembled)7 black head screws FHC (to be used on the wheel raz and fastening of the arm oscillating once the two pieces are combined.)2 different colour cables of 1 meter each for the connection of the lighting L.E.D4 different colour cables of 1 meter each for the connection of the flashing clignoring 1 sheath of 1.10 meter for the passage of the electric cables, supplied with rilsonThe flashing lights are not supplied